Regarding the problem of uneven moisture content during the drying process of corn drying equipment, when using corn drying equipment, the difference in external temperature should be considered, and the moisture generated by the corn entering the machine should be taken into account to adjust the corresponding temperature. If the grain temperature is relatively high, we should also consider the grain after cooling. Depending on the specific situation, the moisture loss can be appropriately increased by 0.3% to 10.5%, which can greatly reduce the reduction of grains during the drying process. The unevenness of moisture content after grain drying refers to the difference between high and low moisture content after grain drying. The reasons are as follows:
1.Improper moisture control: Due to improper moisture control during the drying process, there is a large difference between grains with different moisture contents.
2.Corn drying environment: When drying grain, various environmental conditions must also be considered. Climate, temperature, and grain discharge speed all determine the quality of the grain.
3.Corn dryer blockage:Once there is a blockage problem in the drying tower, it will cause differences in the grain discharge speed, further causing differences in moisture content.
When storing corn, grains with different moisture contents should be stored separately. Generally, the moisture difference should be controlled within 0.3% to 0.5%. During grain drying, it is crucial to maintain suitable environmental conditions. Unstable surrounding conditions can negatively impact grain quality, necessitating careful control of the grain discharge rate and drying conditions. Maintaining stable drying conditions is essential. Cleaning the drying tower can be performed to address any issues that arise. Whether due to problems or routine maintenance, timely tower cleaning is always necessary.
