Coconut pith belt press dewatering machine is to press and dehydrate coconut peat, palm slag and other waste residues with a moisture content as high as 80%-90%, and the moisture content after dehydration is 50-70%. The equipment is intelligently operated, the equipment runs continuously and automatically for 24 hours, and the labor intensity of the workers is low!

Coconut pith belt press dewatering machine working principle

The wet coconut peat is transported to the hopper of the dehydrator through the conveyor, and spread evenly on the filter belt through the screw distributor. With the operation of the equipment, the filter belt is scraped off the height of the material layer by the material limiting plate, so that the thickness of the material is uniform. ; Then the material layer is clamped by the upper and lower two ring-shaped filter belts that are fully stretched. Driven by the driving roller, the counter-rollers in the dehydration zone are mechanically squeezed several times continuously to press out a large amount of water. Automatically adjust the extrusion force according to the characteristics of the material to meet the customer's requirements for material moisture.