In the process of using the sawdust dryer, there are often some problems. The following will explain the five common problems and how to repair and solve them.

  1. During the use of the sawdust dryer or when it is used for a long time, the belt may loose, fall off or break. To solve this problem, the solution is very simple, that is, always check whether each switch is in good contact, whether the fuse is blown, whether the position of the motor is correct, and often replace the belt;

  2. The sawdust dryer may suddenly become very noisy when it is used. To solve this noisy problem, we need to consider from many aspects, such as whether the placement position is unbalanced, if it is placed evenly; whether it is not installed during installation, if it is installed again for a long time; whether the bearing has lost oil or is damaged , If so, replace the bearing; is the fixing bolt of the bearing seat loose, if it is tightened for a long time, etc.;

  3. Sawdust dryers often brake failure, which is mostly caused by excessive brake pad wear, so to solve this problem, just replace the brake pads;

  4. The raw material in the sawdust dryer catches fire, which is mostly caused by improper operation. Therefore, it is recommended that users be familiar with the operation instructions of the dryer before using it, and operate according to the requirements. Of course, it is not ruled out that the sawdust is dried. There is a problem with the design of the machine itself. If it is a problem with the dryer itself, it is necessary to actively negotiate with the manufacturer and request to replace or modify the dryer;

  5. The material in the sawdust dryer cannot be sucked away. This is likely to be a problem during installation, air leakage, etc. To solve this problem is to determine the cause and solve it correctly according to the cause.

  The above are the common problems and maintenance solutions for sawdust dryers. If you want to know more information about Sawdust Dryer, please feel free to contact us.