Zhengzhou Dingli New Energy Equipment Co., Ltd.
When using the wood chip dryer, we need to pay attention to the usual maintenance. Not only the new machine needs to be so, but also needs to pay attention to its maintenance in the later stage. The following content I will explain in detail how to do the post-maintenance of the wood chip dryer.
1. The bearing needs to be inspected regularly. If the friction is too large, it needs to be lubricated in time. Generally, the wood chip dryer needs to check the lubrication part with rotating bearing and roller bearing, all gears, movable bearing and sliding plane;
2. If the working time of the tire is long, it is easy to loosen, and it is necessary to check in time. If there is looseness, it needs to be tightened.
3. Pay attention to the inspection of wearable parts and timely repair and replacement;
4. It is necessary to clean the undercarriage plane regularly to remove dust and other debris, otherwise it may cause the movable bearing to malfunction or even cause a bigger accident;
5. It is necessary to check the oil temperature around the bearing regularly. If the oil temperature rises, it should be stopped and checked in time and eliminated. If there is impact sound when the gear is running, it should be stopped and checked in time to eliminate the problem.
The post-maintenance work of the wood chip dryer is often required by us to pay great attention to it, so as to better reduce the failure of the wood chip dryer, hope to help you better use and effectively extend the service life of the sawdust drying equipment.
