The maintenance work of the brewer's yeast dryer is divided into minor repairs, medium repairs, and overhauls. Large, medium and small repair plans should be prepared according to the use and maintenance of the dryer.
  1. When the cylinder has cracks and local deformation, it needs to be repaired and replaced.
  2. When the surface of the belt is worn into a cone, a polygon, and a local penetration crack, it must be replaced.
  3. When the diameter of the roller journal is 20% smaller or the thickness of the rim is 25%, or the rim is ground into a conical shape or other irregular shape or the rim has a through crack, it must be replaced and repaired.
  4. The lifting plate needs to be replaced after it is severely worn and loses its shape.
  Commissioning and acceptance are the final stages of equipment overhaul, which is the most comprehensive inspection step for the quality of the overhaul project. The equipment is operated under heavy load conditions, and the load conditions can meet the specified technical requirements to achieve the intended purpose of the maintenance work.For more technical questions of yeast dryer, you can contact online customer service or leave a message, our professional technicians will answer you.