Grain drying production line

Date2024-01-30 Back To List

Advantages of Dingli Grain Drying Tower

Grain drying tower equipment is a new continuous grain drying technology that fully combines downstream drying, segmented differential slow cooling and cross-flow cooling based on the characteristics of grain drying. In view of the internal temperature and moisture distribution of the grain, downstream drying and differential slow drying are alternately used. Low temperature and large air volume are used for uniform drying. A short slow drying section is designed in the middle to achieve a reasonable moisture and heat balance inside and outside the grain. After drying, the moisture of the grain is even and the reduction is reduced. The grain burst rate ensures the quality after drying and improves drying efficiency. The lower part of the small grain drying tower is equipped with a long slow-cooling section to achieve an appropriate ratio between grain slow-cooking and drying time, further ensuring the quality of the dried grain.

No matter how the output changes, the dryer can be designed as a single unit, which occupies a small area and has few ancillary equipment; it does not increase the number of operators; it can be produced in the open without a cover. Therefore: the greater the output, the lower the total system investment cost is compared with the circulating dryer, and the more obvious the advantage of high efficiency.

The grain drying production line is designed with all-round hot air ventilation and a wide drying area. Through the constant temperature ventilation device, automatic and rapid temperature adjustment, the hot air indirect heating makes the grains free of any pollution, ensuring that each grain is dried evenly, with good color and smell. Very good, with outstanding quality drying effect.

According to the characteristics and requirements of different grains, appropriate drying methods and equipment need to be selected to ensure the quality and storage stability of the grains. The key to grain drying is to control parameters such as temperature, humidity, and air volume during the drying process to achieve fast, uniform, and efficient drying effects. Dingli can provide free solutions according to your needs.



View More


View More


  • What is the process for purchasing equipment?

    Contact customer service - understand the basic situation - equipment quota-tion - sign contract - equipment production

  • What is the Quality of your products?

    Dingli Group products come with best quality, and our products passed CE certification, exported to lots countries around the word, such as Australia, Malaysia, India, Italy ,Indonesia, Vietnam, Philippines, Korea, Brazil, Argentina, Russia, South Africa, etc. You can rest assured with the quality absolutely.

  • What is the Installation of your products?

    Dingli Group has several experienced technicians with passports ready to go for installation, when installation service is needed, the client should pay for technicians' round way air tickets, food and lodging, most importantly to guarantee the technicians' safety.

  • What is the raw material for the production line? What is the capacity per hour you required?What is the maximum input size of the raw material?What is the output size and application for the final product?

    You can send inquiries from this page.Once we get your answers,we can provide you the best quotation immediately. Remarks: The price will depend on different models.