In order to effectively prolong the service life, the organic fertilizer production equipment need maintenance usually, the maintenance of organic fertilizer equipment mainly from the following several points:

1.lubrication: bearing is the important part in the machine, so good lubrication is greatly related to the bearing lifetime, will directly affects the machine service life and the operation rate, thus requires the lubricating oil must be clean, the seal must be in good condition. The installation of the new tyre prone easy to loose, so need check regularly.

2. Check all parts: organic fertilizer equipment should pay attention to each machine each part work condition. Check the degree of the easy wear spare parts, and replace the spare parts after abrasion seriously can’t use again if needed. The chassis plane active device, should remove dust, to prevent the movable bearings can’t move in on the base when meet unbroken material, to cause serious accidents.

3. Rotating gear check: organic fertilizer equipment if has impact of the noise in the rotation of the machine, should be immediately stopped to check, and eliminate. Due to chemical synthesis of the fertilizer, so the nutrient content of fertilizer are same, which can be a certain percentage at the same time to provide nitrogen phosphorus potassium and other nutrients, to ensure balanced growth.

Above introduce to everyone about the maintenance skills of organic fertilizer equipment, we hope can help for you. In addition, the organic fertilizer equipment maintenance is an extremely important work, should have full-time staff on duty.