Good ventilation is a must for the operation of the dryer equipment. Today I am introducing the precautions for improving the ventilation of the beer waste dryer.

  If the brewing condition of the beer waste dryer is good, the heat conversion rate is high, and the heat conversion rate can also be started from the heating device, the ventilation is good, and the sufficient oxygen can ensure the complete combustion of the combustible material, and provide sufficient thermal energy for drying operation, while reducing the loss of combustibles caused by insufficient combustion.The hot air entering from the inlet is not only the heat transfer with the material, but also promotes the movement of the material from the feed port to the discharge end, avoiding the deterioration of the beer grains in the drying cylinder for a long time, resulting in deterioration or gelatinization. Firstly, the lifting device inside the drying cylinder can be adjusted. The good lifting plate can achieve the effect with half the effort. The beer grains flow slowly in the cylinder with the rotation of the drying cylinder, and the lifting device fully stirs the materials, which not only increases the material and the contact area of the hot air also accelerates the flow of air, taking away the water vapor generated by evaporation, and shortening the drying time. In addition, if the brewer's grain dryer has good ventilation effect, the collection of impurities and waste gas will be more convenient.
  The above are some suggestions for improving the ventilation of the brewer's grain dryer. For more information, you can contact online customer service or leave a message for consult.