Chemical sludge dryer is widely used in various chemical sludge drying treatment.As a professional drying manufacturer, Zhengzhou Dingli can not only tailor sludge drying equipment for customers, but also provide reasonable answers to customers' problems in the drying test process.Belows are notes for chemical sludge dryer test.
  Chemical sludge dryer before use:
  1. Customers should not blindly choose drying equipment. According to their own material characteristics, combined with the guidance of professional technicians, according to local conditions, choose the drying equipment that meets the characteristics of their own materials, so that the perfect drying effect can be achieved;
  2. The customer has a comprehensive control over its own materials. Many sludges have a certain density, bulk density, heat capacity and viscosity. In particular, the viscosity of the sludge has a direct impact on the drying effect. If the viscosity of the sludge is too large, it should be clarified in advance, otherwise the drying process cannot be completed;
  Notes for chemical sludge dryer test process:
  1. After the operator turns on the machine, check whether the system is all normal. After inspection, a small amount of material can be put into the test drying. At the same time, the operator should pay attention to observe whether there is any material blocking during the test operation. Always observe the equipment meter data to show whether everything is normal, closely observe;
  2. In the initial stage of the test machine, it should not be rushed in, and ignore the running stability of the drying equipment itself. During the test machine, a small amount of feed is prepared in advance, waiting for the temperature of the drying equipment to reach the ideal value, and the plate is running smoothly. , gradually increase the feed amount and observe the sludge drying effect;
  3. When the sludge dryer is shut down, the drying cylinder should continue to rotate. When it is cooled until it is close to the outside temperature, it can stop completely. It is forbidden to stop at high temperature, so as not to damage the cylinder of the dryer, check the looseness of the parts in time, and improve the drying efficiency.
  The chemical sludge dryer test machine must be carried out under the guidance of professionals. The above is the effective experience that Dingli engineers have visited in detail on the test machine for the reference of customers.For more technical matters related to sludge drying, you can pay attention to the Dingli professional dryer website, we will continue to push you more information on sludge drying.