In order to improve the production efficiency of the feed dryer and extend the service life of the equipment, the maintenance of daily work is indispensable, but not all parts need regular maintenance. How to avoid unnecessary work and improve the efficiency of daily work, I will analyze it for you.
  1. Before starting the device, carefully check that each component is in a normal state. For example, check the connection status of each switch, whether the screw bolts are loose, whether the lubricating oil is sufficient, whether there is any residual material in the drying cylinder, and if there is any unqualified phenomenon, it should be dealt with immediately.
  2. Check whether the feed to be dried contains impurities, ensure the purity of the dried feed, and avoid production failures.
  3. Start the machine in strict accordance with the boot sequence of the manual. During the operation, always pay attention to the bearings of the motor, reducer and various transmission components to ensure the stability of the voltage. Uniform speed is achieved during feeding to ensure feed drying efficiency and quality.
  4. The heat source is the key factor to ensure the quality of the feed drying. The fire tube ablation and the furnace wall are inspected in time to ensure the normal operation of the heating furnace. If there is an abnormal phenomenon or sound in the operation, stop the inspection immediately and dispose of it in time.
  5. If the feed dryer is temporarily idle, it is necessary to clean the residual materials in the drying cylinder in time, and regularly add lubricating oil to each lubrication point. In addition, the equipment is generally open-air operation, and attention should be paid to the maintenance of anti-corrosion and anti-rust equipment.
  A set of feed dryer equipment can be operated according to production requirements, and daily maintenance and maintenance work is required. It is no longer impossible to extend the service life of the equipment and improve production efficiency.