Fly ash is fine ash produced by coal-fired power plants and has gelling properties when mixed with cement and water. Dingli fly ash dryer can facilitate the reuse of wet blown fly ash.

Coal ash dryer system structure:

1. Heat source system 2. Conveying system 3. Drying system 4. Dust removal system 5. Stock silo 6. Electric control system

Features of coal ash dryer:

1. The final moisture content of the material is guaranteed to be below 0.5%, which is the first product of the fly ash and slag powder production line.

2. The thermal efficiency of the self-insulation of the cylinder is as high as 80%, and the thermal efficiency is increased by 45%. The fuel can be coal, oil and steam, and it can dry lumps, pellets and powdery materials below 20mm.

3. Compared with the single cylinder dryer, the floor area is reduced by about 50%, the civil construction investment is reduced by about 50%, and the power consumption is reduced by 60%.

4. Made of alloy steel plate, it is 4 times more wear-resistant than ordinary steel.

5. The required final moisture index can be easily adjusted according to user requirements.

6. The air outlet temperature is low, and the dust removal equipment can be used for a long time.

7. There is no need for large and small gears to rotate, and the tug wheel is used to rotate.