The flash drying equipment produced by our company has been used in various fields, including pharmaceuticals, chemicals, food, beverages, minerals, electronics, agricultural products processing, etc., with rich production experience. Next, I will explain to you the application of flash dryer in pesticides.

  The special flash dryer for pesticides is specially designed for pesticide processing and drying treatment. Pesticides with similar material types are as follows: ① Cartap, a pesticide that kills worms in silkworms, has an initial moisture content of 20% before processing and is in the shape of a filter cake. It is required to become a powder material with a water content of 1% after processing. ② Ethiofencarb is a kind of pesticide for plant insecticide, low toxicity, heating temperature can not exceed 200 ℃, raw material is filter cake, initial water volume 20%, final water volume 1%, after processing into powder. ③Abamectin can effectively control borers and pests. It has been widely used. The drying requirement is to process 80% moisture raw materials into powder crystals with 15% final moisture. ④Sweeping mites is often used to prevent insects in tea, cotton and fruit trees. It has a good contact effect and has little impact on people and the environment. The initial water content of the cake-like material before processing is 25%, and the material after processing becomes a powder with a final water content of 1%. ⑤ Paclobutrazol, a plant growth regulator, helps to increase the output of rice, wheat, fruit trees, and flowers. The effect is remarkable. Before drying, the material is a filter cake with 26% of the initial water content. After drying, the material becomes The final water content is 1% white powder, and the heating temperature cannot exceed 166℃. ⑥ Methomyl, which mainly controls planthopper pests, is highly toxic. The material needs to be dried at low temperature, the heating temperature cannot exceed 76°C, the initial water volume is 15%, the final water volume is 2%, and the powdered solid crystal after processing. ⑦Mancozeb is used to provide zinc to plants, solve plant zinc deficiency, and enhance physical resistance. The material and copper, mercury and other substances are easily decomposed into carbon disulfide gas, which affects the product's efficacy, so pay attention to avoid contact between the material and the reactant, and the heating temperature should be lower. The initial moisture of the material is 30%, and the final moisture after processing 1%, pure product is white powder. ⑧Tricyclazole, a fungicide, has a significant effect on the prevention and treatment of rice blast. The industrial original drug is orange crystal, stable to water, light, and heat. Strong oxidants are contraindicated. The heating temperature cannot exceed 188℃, the initial moisture is 28%, and the final moisture is 1%. ⑨Atrazine is mainly used for weeding. The herbicide is prone to phytotoxicity, has a long lasting effect, and has low toxicity to humans and animals. The initial moisture content of the material is 40%, the final moisture content is 1%, the heating temperature cannot exceed 175℃, and the finished product is white powder.

  This equipment is mainly aimed at filter cakes, paste-like materials, larger and wetter materials, the material mass is broken after passing through the agitator, and then enters the furnace, and conducts heat transfer between the two phases with the heated air. The material is sheared, floated, and rotated, so the object is micronized by centrifugation, shearing, collision, and friction, which has super drying properties. It can be used through the above materials of the same type.

  Zhengzhou Dingli is a professional manufacturer of flash dryers. We will carefully select the drying equipment required by every customer, considering the practicality and practicality of the production, and some hidden safety hazards. From design, to production, to maintenance, our company will do every step carefully to maximize customer satisfaction. Welcome to visit our factory!